Open Access Open Access  Restricted Access Subscription or Fee Access

Optimization and Modelling of Process Parameters for Turning Operation on Cnc Lathe for ASTM A242 Type-2 Alloy Steel by Regression Analysis and Artificial Neural Network

Vijay A. Bhagora, Saurabh P. Shah

Abstract


The purpose of this project is focussed on the modelling of cutting conditions to get the lowest surface roughness in turning ASTM A242 TYPE-2 ALLOYS STEEL by Artificial Neural Network and Regression Analysis method on the CNC lathe. The process of metal cutting has been well researched over the years; relatively small research has been carried out on the cutting of alloy of ASTM A242 grade materials. In this study, the effect and modelling of machining parameters cutting speed, feed rate and depth of cut and tool nose radius on surface roughness will be checked.

Keywords: ASTM A242, CNC, turning process, artificial neural network, regression analysis, surface roughness

 

Cite this Article
Bhagora A. Vijay, Shah P. Saurabh. Modelling and Optimization of Process Parameters for Turning Operation on CNC Lathe for ASTM A242 Type-2 Alloy Steel by Artificial Neural Network and Regression Analysis. Journal of Advancements in Robotics. 2015; 2(2): 40–51p.


Full Text:

PDF

References


Plaza et al. Surface Finish Monitoring in Taper Turning CNC Using Artificial Neural Network and Multiple Regression Methods. The Manufacturing Engineering Society, Procedia Engineering. Department of Education and Science of the Autonomous Government of the Community of Castilla- La Mancha (Junta de Comunidades de Castilla-La Mancha), Spain. Research project number Ref. PBI08-0288-3732 (2010-2012), 2013; 63: 599–607p.

Sainia SK, Pradhan SK. Optimization of Multi Objective Response during CNC Turning Using Taguchi-Fuzzy Application. 12th Global Congress on Manufacturing and Management, GCMM 2014, Procedia Engineering. 2014; 97: 141–149p.

Doriana M., Addona D., Teti R. Genetic algorithm-based optimization of cutting parameters in turning processes. Procedia CIRP. 2013; 7: 323–328p.

Sahoo P. Optimization of Turning Parameters for Surface Roughness Using RSM and GA. Advances in Production Engineering & Management. ISSN 1854-6250. 2011; 6 (3), 197–208p.

Yadav UK, Narang Deepak, Attri PS. Experimental Investigation and Optimization of Machining Parameters for Surface Roughness. In 67 CNC Turning By Taguchi Method. International Journal of Engineering Research and Applications (IJERA). ISSN: 2248-9622. July-August 2012; 2(4): 2060p.

Edwin Paul N.E, Marimuthu P, Venkatesh Babu R. Machining Parameter Setting For Facing EN8 Steel with TNMG Insert. ISSN (Print): 2328-3491, ISSN (Online): 2328-3580, ISSN (CD-ROM): 2328-3629.

Vikas B. Magdum, Vinayak R. Naik. Evaluation and Optimization of Machining Parameter for turning of EN 8 steel. International Journal of Engineering Trends and Technology (IJETT). May 2013; 4(5).

Ganesan et al. Optimization of Machining Parameters in Turning Process Using Genetic Algorithm and Particle Swarm Optimization with Experimental Verification. Feb 2011; 3(2).

Patil S., Pimpalgaonkar, D.S. Ade Santoshlaxmanrao. Optimization of Process Parameters in CNC Turning Machine. Proceedings of 10th IRAJ International Conference. 27th October 2013, Tirupati, India. ISBN: 978-93-82702-36-8

Manjunatha R. Optimization of Feed Force, Tangential Force and Surface Roughness by using Grey based Taguchi Method. International Journal of Latest Trends in Engineering and Technology (IJLTET).

Kumar et al. Multi Response Optimization on AISI 410 and En 19 Steel in Turning Operation Using Grey Relational Analysis. ISSN 2278–0149 www.ijmerr.com. April 2014; 3(2).

Kumar et al. Optimization of Turning Parameters by Using Taguchi Method for Optimum Surface Finish. ISBN: 978-93-84209-03-264

Kabra et al. Parametric Optimization & Modeling for Surface Roughness, Feed and Radial Force of EN-19/ANSI-4140 Steel in CNC Turning Using Taguchi and Regression Analysis Method. International Journal of Engineering Research and Applications (IJERA). ISSN: 2248-9622.

Verma J, Agrawal P & Bajpai L. Turning Parameter Optimization for Surface Roughness of ASTM A242 type-1 Alloys Steel by Taguchi Method. International Journal of Advances in Engineering & Technology. March 2012.

P. Prasanna, Ch. Penchalayya, D. Anandamohana Rao. Optimization and Validation of Process Parameters in Friction Stir Welding on AA 6061 Aluminum Alloy Using Gray Relational Analysis. International Journal of Engineering Research and Applications (IJERA). ISSN: 2248-9622.

Beatricea et al. Surface Roughness Prediction using Artificial Neural Network in Hard Turning of AISI H13 Steel with Minimal Cutting Fluid Application. Manufacturing And Management, GCMM 2014, Procedia Engineering, Published by ELSEVIER. 2014; 97: 205–211p.

Gowda et al. Optimal Selection Of Machining Parameters In CNC Turning Process Of EN-31 Using Intelligent Hybrid Decision Making Tools. Procedia Engineering. 2014; 97: 125–133p.

B. Singarvel, T. Selvaraj, R. Jeyapaul. Multi Objective Optimization in Turning of EN25 Steel Using Taguchi Based Utility Concept Coupled With Principal Component Analysis. Procedia Engineering. 2014; 97: 158–165p.

Das et al. Investigations on hard turning using coated carbide insert: Grey based Taguchi and regression methodology.

Khan et al. A Study on Micro Hardness in Wire Electrical Discharge Machining Based On Taguchi Method. International Journal of Mechanical And Production Engineering. ISSN: 2320-2092. July-2013; 1(1).

Ezugwua et al. Modeling the Correlation between Cutting and Process Parameters in High Speed Machining of Inconel 718 Alloy Using An Artificial Neural Network. International. Journal of Machine Tools and Manufacture. 2005; 45: 1375–1385p.

Madhu et al. Optimization of cutting parameters for surface roughness prediction using artificial neural network in cnc turning. An International Journal (ESTIJ), ISSN: 2250-3498. April 2012; 2(2).

Thakkar J, Patel IM. A Review on Optimization of Process Parameters for Surface Roughness and Material Removal Rate for SS 410 Material during Turning Operation. Journal of Engineering Research and Applications. www.ijera.com ISSN: 2248-9622, February 2014; 4(2): (Version 1): 235–242p.

C. Natarajan, S. Muthu and P. Karuppuswamy. Investigation of cutting parameters of surface roughness for a non-ferrous material using artificial neural network in CNC turning. Mechanical Engineering Research. January 2011; 3(1): 1–14p.

Lavanya et al. Optimization of Process Parameters in Turning Operation of AISI-1016 Alloy Steels with CBN Using Artificial Neural Networks. International Journal of Engineering Trends and Technology (IJETT). Nov 2013; 5(6).

Kumar M and Biswas A. Application of Taguchi And A.N.N. Method for Optimization of Machining Parameters. VSRD International Journal of Mechanical, Civil, Automobile and Production Engineering. Feb. 2013; 3(2).

Kumar N, Chhabra KK. An Overview of Optimization Techniques for CNC Milling Machine. International Journal of Engineering, Management & Sciences (IJEMS). ISSN 2348–3733, May 2014; 1(5).


Refbacks

  • There are currently no refbacks.


This site has been shifted to https://stmcomputers.stmjournals.com/