PSO tuned SVM-SMC Controller for the Trajectory Tracking of a Five Bar Linkage Manipulator System

Authors

  • G. Krishan
  • V. R. Singh

Abstract

Abstract

Remarkable advantages of SVM make it one of the most widespread and successfully used estimating technique of the era especially for the non-linear systems like robotic manipulators. Control system used in trajectory tracking problems of robotic manipulator is of great importance and hence, accuracy in tracking of manipulator is directly associated to the improvement in the quality of the controller engaged. So, to improve the control performance of the SVM based control technique, it is very important to select the optimal values of its three interdependent free parameters. Hence, in this paper, PSO has been used to get optimal values of these SVM parameters.  Performance of the proposed PSO optimized SVM controller has been validated by checking its performance on a five-bar linkage robotic manipulator system having uncertainties. From validity checking point, simulation results have been compared with the results of the GA optimized SVM and the basic SVM. In last, suitable conclusions have been drawn from the study performed and it has been found that the PSO is showing its supremacy over conventional GA and the PSO optimized SVM based controller is performing best out of the three.

Keywords: Support Vector Machines, Particle Swarm Optimization, Hybrid Intelligent Controllers, Manipulators.

Downloads

Published

2018-03-21

Issue

Vol. 5 No. 1 (2018)

Section

Research Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.