A Novel Analysis of Artificial Intelligence in Mechanical Engineering Application

Authors

  • Niraj R. Shingala Assistant Professor, Department of Mechanical Engineering, V.V.P. Engineering College, Rajkot, Gujarat, India
  • Ankit V. Sata Assistant Professor, Department of Mechanical Engineering, V.V.P. Engineering College, Rajkot, Gujarat, India
  • Parth V. Delvadiya Assistant Professor, Department of Mechanical Engineering, V.V.P. Engineering College, Rajkot, Gujarat, India

Keywords:

Artificial intelligence, mechanical, complex algorithms, smart systems, Fuzzy logic, neural networks, boundary element method (BEM), method of fundamental solutions (MFS)

Abstract

In this study, we have tried to explain the crucial role of Artificial Intelligence (AI) in the running of mechanical industry. The technology used these days in the machines is to aid the solution towards the real-world problems and complex situations. Many AI algorithms have been able to provide the solution to many engineering approaches. The importance of the artificial intelligence has automatized the mechanical engineering with smart machines and robots. Algorithms including computation systems, fuzzy logic systems, and neural networks have grown to solve the problems in engineering. Artificial intelligence has laid a good impact over these years in the engineering industry and has evolved smart systems that are a great aid to the human life and has also widened the horizons for the researchers with respect to future.

Cite this Article

Niraj R. Shingala, Ankit V. Sata, Parth V. Delvadiya. A Novel Analysis of Artificial Intelligence in Mechanical Engineering Application. Journal of Artificial Intelligence Research & Advances. 2018; 5(3): 35–38p.

References

Sivanandam SN. Introduction to Neural Networks Using Matlab‖. Tata Mcgraw Hill. 2006.

Bishop CM. Neural Networks for Pattern Recognition. Oxford: Clarendon Press. 1995.

Lippmann RP. An Introduction to Computing with Neural Nets. IEEE Accost. Speech Signal Process. Mag. April 1987: 4-22p.

Norvig P, Russell SJ. Artificial intelligence: A modern approach. Applied Mechanics & Materials 2003; 263(5): 2829–2833p.

Brooks RA. Intelligence without representation. Artificial Intelligence. 1991; 47 (1-3): 139–159p.

Goldberg DE, Holland JH. Genetic algorithms and machine learning. Machine Learning. 1988; 3(2): 95–99p.

Chandrasekaran B. Generic tasks in knowledge-based reasoning: High-level building blocks for expert system design. IEEE Expert. 1986; 1(3): 23–30p.

Lecun Y, Bengio Y, Hinton G. Deep learning. Nature. 2015; 521(7553): 436–444p.

Bolton W. Mechatronics electronic control systems in mechanical and electrical engineering. Fish Physiology & Biochemistry. 2009; 35(3): 385–398p.

Jack LB, Nandi AK. Fault detection using support vector machines and artificial neural networks, augmented by genetic algorithms. Mechanical Systems & Signal Processing. 2002; 16(2-3): 373–390p.

Siddique A, Yadava GS, Singh B. Applications of artificial intelligence techniques for induction machine stator fault diagnostics: Review. IEEE International Symposium on Diagnostics for Electric Machines. 2003; 49(3): 29–34p.

Wen WH. Application of artificial intelligence technology in mechanical and electronic engineering. Automation and Instrumentation. 2016; 2: 96–97p.

Downloads

Published

2019-01-27

Issue

Vol. 5 No. 3 (2018)

Section

Research Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.