Electronic Safety Locker with SMS Alert

Authors

  • Anita Bhatt Student, Electronics Department, BVM Engineering College, India
  • Palak Patel Assistant Professor, Electronics and Communications Department, BVM Engineering College, India
  • Ripal Patel Assistant Professor, Electronics and Communications Department, BVM Engineering College, India
  • Alpita . Student, Electronics Department, BVM Engineering College, India

DOI:

https://doi.org/10.37591/joosd.v5i3.1941

Keywords:

Microcontroller, GSM Module, Matrix Keypad, LCD Display, Relay, Buzzer

Abstract

The title of the project is electronic security locker. It'll be valuable for society, bank as well as industry. The outline of this venture is that the locker has five level passwords. Administrator needs to split all of five secret words; this can be the primary security. In the event that client cannot effectively break five attempts at that point entirety framework can be hang and buzzer on until ace code enters by client as well as same time GSM send message to enlisted number.

Cite this Article

Anita Bhatt, Palak Patel, Ripal Patel, et al. Electronic Safety Locker with SMS Alert. Journal of Open Source Developments. 2018; 5(3): 17–20p.

 

References

Abhilasha A Sayar, Sunil N Pawar, Securing Bank Locker System Using Embedded System, Int J Adv Res Electron Commun Eng (IJARECE). 4(8), August 2015.

Balaji A.M. Venkatesh, Karthik Kalkura, Shriraam AC. Int J Eng Adv Technol (IJEAT). 3(2), December 2013.

Int J Emerg Trend Technol Comput Sci. (IJETTCS) Web Site: www.ijettcs.org, 2(2), March – April 2013.

Ramani R, Valarmathy S, Selvaraju S, Niranjan P. Bank Locker Security System based on RFID and GSM Technology, Int J Comput Appl. 57(18), November 2012

Downloads

Published

2019-03-01

Issue

Vol. 5 No. 3 (2018)

Section

Research Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.