Digital PID Chip Design and FPGA Synthesis

Authors

  • Manoj Gupta
  • Vishal Sharma
  • Adesh Kumar

DOI:

https://doi.org/10.37591/rtpc.v5i2.1572

Abstract

The industrial applications follows the control operations based on closed loop system due to their stability and controllable desired response. The proportional-integral-derivative (PID) controller is one the most adopted controller in dynamic control systems. In some industries, specific PID controllers are used for particular control.  The PID control is used for early days staring form mechanical and pneumatic designs, and its implantation is based on analog circuits using transistors. There are two types of PID controllers: analog PID control and digital PID control.  Analog PID controllers are much truthful as they are capable to sense constant and continuous changes.  Digital PID are emerging now due to faster response of these systems when integrated with microprocessor-based system, FPGA and DSP processors. The digital systems   also provide low cost solutions in the competitive world and allows parallel processing and concurrent operations.  The paper focuses on the digital PID controller and its implementation in HDL environment on Xilinx ISE 14.2 and functional simulation in Modelsim 10.0 software.  The digital PID is also synthesized on SPARTAN 3E FPGA.  The hardware report as parameters of FPGA and timing values are extracted directly form Xilinx software.

Keywords: Digital signal processing (DSP), field programmable gate array (FPGA), proportional–integral–derivative (PID), very high speed integrated circuit hardware description language (VHDL)

Cite this Article
Manoj Gupta, Vishal Sharma, Adesh Kumar. Digital Proportional–Integral– Derivative Chip Design and Field Programmable Gate Array Synthesis. Recent Trends in Parallel Computing. 2018; 5(2): 13–19p.

Downloads

Published

2018-09-04

Issue

Vol. 5 No. 2 (2018)

Section

Research Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.