Half Adder Using Different Design Styles: A Review on Comparative Study

Authors

  • Anju Rajput
  • Tripti Dua
  • Dr. Renu Kumawat
  • Dr. Avireni Srinivasulu

Keywords:

Power dissipation, CMOS, pass transistor, transmission gate, transistor count

Abstract

Abstract

A half adder is a digital logic circuit that performs addition of two single bit binary numbers. Generally, in various types of processors, adders are used to perform arithmetic and logical operations .In this paper, working of half adder is analysed by designing it by using three different logic styles, i.e., CMOS logic, Transmission Gate Logic (TGL) and Pass Transistor Logic (PTL). The comparison has been made between the circuits on the basis of their power consumption and transistor count. Simulation of the circuits is carried out using HSPICE tool at 45 nm, 32 nm and 16 nm technologies at 1V power supply. After simulation it is observed that power consumption is lowest when the adder is implemented by transmission gate as compared to CMOS and PTL design styles whereas transistor count is minimum in case of PTL design style. It is also inferred that CMOS gives the best performance out of the three design styles.

Downloads

Published

2021-02-09

Issue

Vol. 7 No. 3 (2020)

Section

Review Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.