A Survey on Various Study for SRAM Cell Topologies

Authors

  • Vaibhav Shrivastava
  • Nikhil Saxena

DOI:

https://doi.org/10.37591/josettt.v6i3.2310

Abstract

Abstract: In order to meet performance demands continuous derivative, the amount of on-chip memory or microprocessors and system-on-chip is increased. As much as 70% of the chip area is now given to the embedded memory, which is mainly realized by the static random access memory (SRAM). Due to the large size of the SRAM, their energy performance and leakage performance and leakage dominate total energy consumption of the chip. The leakage power being the major topic of concern in semiconductor industry is needed to be reduced to its lowest. Since the static power consumption and dynamic power consumption degrades the performance of the on chip devices due to high integration density. Therefore, the leakage reduction improves the efficiency of the on chip devices. Since, the memory structures are coupled through a large fraction of the region of a microprocessor chip. Due to the large on-chip memories approximately 90% of the SOC, reducing leakage current even in single cell cache, a large fraction of the total power can be decreased in integrated circuits. However, as CMOS technology continues to scale in the system of 45 nm to reduce the cost and dynamic power transistor, poses a number of challenges in the design of SRAM. In this paper, we address these challenges and propose solutions to the cell level and architecture level to increase performance and reduce leakage current, power consumption and improve reading speed SRAM cell in Nano-scale CMOS technologies.

Keywords: SRAM Cell, Lekage Current, CMOS, FinFET, Leakage Power

Cite this Article: Vaibhav Shrivastava, Nikhil Saxena. A Survey on Various Study for SRAM Cell Topologies. Journal of Software Engineering Tools & Technology Trends. 2019; 6(3): 1–8p.

Downloads

Published

2019-12-31

Issue

Vol. 6 No. 3 (2019)

Section

Research Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.